Seal leaks in concrete or masonry with crack injection and curtain grouting of our Prime Flex polyurethanes and AR acrylate resins. Prime Resins offers superior solutions for stopping leaks in every type of environment.
Sound concrete relies on a sound substrate. Stabilize soils and fill voids with our polyurethane and acrylate foams and gels. We make chemical grouts for permeation and compaction grouting in wet and dry conditions.
Slab lifting and slab stabilization with polyurethane foams offers many advantages over traditional mudjacking. Only Precision Lift is engineered to tackle underlying issues and slab lifting with precise, dependable results.
Protecting concrete usually means shielding it from the elements of nature or from harsh manmade chemicals. But it’s not just concrete that needs such protection. Corrugated metal pipe, steel surfaces, material hoppers, rail cars and masonry all can come in contact with corrosive or abrasive materials or harsh conditions.
Spalled concrete is concrete that is chipped, cracked and deteriorating. This often happens at a joint.
You can repair a seawall or bulkhead with Prime Resins chemical grouts: fill voids, stabilize loose soil and seal leaks at a fraction of the cost of wall replacement.
The need for crack repair in concrete structures can be caused by many different factors. Damage can occur to the concrete in situations where direct impact puts stress on one area of the structure.
The geotechnical needs of DOTs and other agencies responsible for roads and bridges are vast. Issues include: Culvert repair Soil stabilization Void filling Concrete slab lifting Sinkhole remediation Slope control Slough control in tunneling
Are you ready to hit the ground running doing concrete leveling with polyurethane foam? Prime Resins offers the industry’s best suite of products for lifting concrete as a turnkey, fully equipped trailer rig.
Prime Resins takes pride in its ability to find the right solutions to the problems facing our customers. Here are some examples of customers’ successful jobs:
Prime Practices are repair procedures or 'how-to's' for using our products.
Instructional videos as well as job site footage.
Calculators, charts and worksheets to help in estimating your jobs.
The superior quality of products at a fair price, our consultative approach, and our unparalleled technical support set Prime Resins apart. Learn more about the Prime difference.
Works with any product packed in 750ml x 75ml (10:1 27.5oz). Works with Prime Flex 920. Item # 11308.
Easily converts in just seconds with snap-in/snap-out push disks. Works with any product packed in 300ml x 300ml (1:1 – 20.28 oz), 300 ml x 150 (2:1 15.21 oz) and 300ml x 75ml (4:1 12.67 oz) cartridges. Works with Prime Rez 1000, 1100, 1200, 1600; Prime Gel 2000, 2100, 2200, 2500 Quick Bond; Speed Bond #1; Prime Flex 900 XLV, Hydro Gel SX. Item # 11307
Nominal thrust 490 lbs @ 100 psi / 2.5” cylinder Easily converts in just seconds with snap-in/snap-out push disks. It works with Prime Rez 1000, 1100, 1200; Prime Gel 2000, 2100, 2200, 2500 Quick Bond; Speed Bond #1; Prime Flex 900 XLV, Hydro Gel SX. Item # 11305
Air-powered gun for chemical grouting injection with cartridges. Converts in seconds with snap in/snap out push disks. Nominal thrust 1100 lbs @ 100 psi. Works with any product packed in 750ml x 750ml (1:1 50.72 oz), 750ml x 75ml (10:1 27.5 oz), 600ml x 600ml (1:1 40.56 oz), 300ml x 300ml (1:1 20.28 oz) cartridges. It works with Prime Gel 2100, 2200, 2500; Speed Bond #1; Prime Flex 920, Hydro Gel SX. Item #11306
The FlowMaster Wand is specifically engineered to apply Prime Resins epoxies and polyureas for joint fill applications. With the contractor in mind, the FM Wand only has two moving parts (actuation valves). This ensures durability, ease of operation, and minimal downtime in the event of blockage or crossover. Item # 11425
The FlowMaster Pistol is a compact, lightweight, divorced manifold type dispense pistol. It is designed to use external static mixers. Engineered with the contractor in mind, it has only two moving parts (actuation valves) which ensures durability, ease of operation, and minimal downtime in the event of blockage or crossover. Item # 11426
The Equalizer gun is the only impingement gun engineered to handle back pressure induced when conveying two-component polyurethane foam to lift slabs, fill voids and stabilize soils. Aside from the actuation valves, this gun has no internal moving parts and NO O-rings (outside of the ball valve), which makes maintenance quick and inexpensive.
Easy to use cartridges of epoxy, polyurea and polyurethane resins in a portable system. A variety of ratios are available to suit your project.