How-To Section: Infrastructure Repair Procedures
Over the course of many years, our how-to advice has been documented and refined. Each product and application calls for unique procedures. It is our intent to provide how-to guidance for most scenarios. As new techniques are developed and as we advance new technologies, this section will be updated. Not sure which technique or product to choose? Our technical consultants are here to walk you through your options. We encourage you to call our tech support team at 1-800-321-7212.
Crack Repair / Leak Seal
- Injecting Wet Cracks with Quick Mix Cartridges and Bang In Ports
- Activated Oakum
- Flushing Drill Holes and Installing High Pressure Ports
- Sealing Hairline Cracks with Prime Flex 900 XLV
- Sealing Gushing Leaks with Prime Flex 920 in Quick Mix Cartridges
- Sealing Leaks in Manholes with Hydro Gel SX
Pipe and Culvert Restoration
- Point Repair from Outside the Pipe
- Sealing Joints in Precast Concrete
Soil Stabilization
- Permeation Grouting Sandy Soils
Lifting and Leveling Concrete Slabs
- Slab Jacking with Precision Lift Foam
Equipment Maintenance
- Flushing a Single-Component Pump
Floor Repair
- Repairing Spalls and Chips in Industrial Concrete Floors with Prime Bond (epoxy)
- Repairing Spalls and Chips in Industrial Concrete Floors with Floor Fix (urethane)
- Creating an Epoxy Mortar for Spall and Joint Repair
Using Epoxies for Concrete Structural Repair and Protective Coating
- Applying Protective Epoxy Coating
- Surface Preparation
- Creating an Epoxy Mortar for Spall and Joint Repair
- Anchoring Bolts, Dowel Bars and Rebar with Epoxy
|
|