The
FLOWMASTER is a powerful yet simple air operated unit featuring
consistent air pressure from a 5” air motor with instantaneous
reversing, delivering uniform fluid / mixing pressure. There is
no lead / lag or pressure drops that can adversely affect the
mix of the A & B materials. The design of the air motor delivers
efficient, consistent trouble free operation. The FLOWMASTER operates
from a separate air source or it can be outfitted with an optional
on-board air compressor. No electricity is required and there
are no gears to jam or belts to slip or break.
The FLOWMASTER is ideally suited for pumping Prime Resins’
line of urethane joint sealers and dual-component polyurethane
resins. It can also be used to pump any of the Prime-Flex products
as a single component material.
|
Total
Air Requirements
at 1 gpm (3.8 lpm) Output: |
1.0
GAL PER MINUTE - 17 CFM @ 100 PSI
1.5 GAL PER MINUTE - 24 CFM @ 100 PSI
2.0 GAL PER MINUTE - 33 CFM @ 100 PSI |
|
Output
Pressure: |
1600 PSI @ 100 PSI AIR
Max Working PSI=1760 PSI |
|
Output
Ratio: |
1:1 (2:1 Optional) |
|
Discharge
Hose: |
15' of 3/8" I.D. H.P. Hose |
Features:
Dispensing gun allows materials to be injected while standing
or walking
Built-in material shelf adds convenience for easy dispensing
directly from shipping containers
Iso-neutralizer Recirculation System prevents crystallization
around the piston rod caused by humidity
Optional on-board air compressor can be installed
FLOWMASTER
Printable Data Sheet
Our Products | Learning
Center | About Us | Contact
Us | Search | Events
| Case Studies | Home
| Links | Legal Info
2291 Plunkett Rd. Conyers, GA 30012
800.321.7212 or 770.388.0626
