Anchoring Adhesive Gels are used to anchor bars, dowels, rods and bolts in concrete. Our most popular anchoring adhesive gel is Speed Bond #1, a smooth flowing, high strength resin that does not contain abrasive fillers that can damage pumping equipment. All three Anchoring Adhesive Gels have high bond strengths and good working times. Other Prime Gel products are used for surface sealing of cracks prior to injection and patching vertical and overhead cracks in concrete.

Speed Bond #1

Speed Bond #1 is our best selling gel adhesive. Unlike many competitive products that contain harsh abrasive fillers, Speed Bond #1 is formulated to flow smoothly through mechanical pumps. Speed Bond #1 has a good working time and excellent strength characteristics. This product conforms to ASTM C-881, Types I and II, Grade 3, Class A & B.

Fast Lane

Fast Lane is an excellent general purpose anchoring adhesive. Most contractors prefer Fast Lane in our convenient 22 ounce Quick Mix dual cartridges.

Prime Gel 2500 Quick Bond

Prime Gel 2500 is a very fast setting epoxy gel. Because of its fast set up time, it will cure at sub zero temperatures. This product conforms to ASTM C-881, Types I and II, Grade 3, Class A & B.

Prime Gel 2000 High Mod

Prime Gel 2000 High Mod is our most popular epoxy gel adhesive. It has good working time and high strength. This product conforms to ASTM C-881 Type I, II, IV and V, Grade 3, Class B & C.

Prime Gel 2100 Low Mod

Because of its high tensile strength, Prime Gel 2100 Low Mod is often selected where a pick-proof gel adhesive is required. This would include correctional facilities, schools and other public buildings. When required, this material can be supplied with a faster set-up time.

Prime Gel 2200 Flexible

Prime Gel 2200 Flexible is ideal for surface sealing cracks that are subject to movement. It can also be used to fill saw cut joints.

Prime Gel 2800 SSS

Prime Gel 2800 Strippable Surface Seal is used to temporarily surface seal cracks prior to injection. It can easily be peeled to remove after injection is complete without grinding.

Speed Bond #1

Fast Lane

Prime Gel 2500 Quick Bond

Prime Gel 2000 High Mod

Prime Gel 2100 Low Mod

Prime Gel 2200 Flexible

Property

Anchoring Adhesive Gel

Anchoring Adhesive Gel

Anchoring Adhesive Gel

-

-

-

-

-

Surface Sealing, Vertical & Overhead Patching Gel

Surface Sealing, Vertical & Overhead Patching Gel

Surface Sealing, Vertical & Overhead Patching Gel

Surface Sealing, Vertical & Overhead Patching Gel

Viscosity

Flowable Gel

Non-Sag Gel

Non-Sag Gel

Non-Sag Gel

Non-Sag Gel

Non-Sag Gel

Pot Life
2 ounces (60 grams)
@ 73° F (23° C)

8 min

8 min

3 min

32 min

48 min

35 min

Compressive Strength
(ASTM D-695)

7,050 psi

3,000 psi

8,200 psi

9,500 psi

4,940 psi

Flexible

Bond Strength
ASTM C-882  2 day

3,337 psi

1,000 psi
(24 hours)

3,060 psi

3,340 psi

1,560 psi

N/A

Conforms to:

Types I, II Grade 3 Class A,B & C

N/A

ASTM C-881
Types I, II
Grade 3
Class A & B

ASTM C-881
Types I, II, IV, V
Grade 3
Class B & C

N/A

N/A