Prime Gel 2800 Strippable surface seal

Product Description

strippable surface sealPrime Gel 2800 Strippable surface seal is a rapid cure polyurea non-sag paste designed as a temporary surface seal prior to injection of epoxy or polyurethane crack sealants. It can be stripped off of the concrete once the injection resin has cured, leaving a clean, unmarred surface. This is a 100% solids non-sag paste that won’t sag, run or drip in vertical or overhead applications.

Recommended Uses

  • Temporary surface seal of cracks in concrete, masonry, stone and wood prior to grout injection (surface must be dry)
  • Secure injection ports prior to injection

Typical Areas of Use

• Often used for basement wall or foundation repair, architectural concrete, precast components and tilt-up panels
• Parking decks
• Cracked tanks or pits that have been drained

Advantages

• Rapid cure, strippable formula allows for quicker crack injection process.
• Smooth non-sag paste consistency (no grit) for vertical/overhead applications.
• No grinding needed; eliminates dust.
• Strips off wall for quick, clean, easy removal.

Packaging

1:1 Quick Mix cartridges case of 10

Coverage

1/8” thick x 2’ wide = 10 linear feet (3 meters) per gallon

Made in the U.S.A.

Recommended Products:

View Prime Gel 2000 High Mod Details

Prime Gel 2000 High Mod

Extremely smooth consistency, two-component epoxy gel adhesive that won’t sag, run or drip in vertical or overhead applications. Extremely strong. USDA approved.

View Details »
View Prime Gel 2100 Low Mod Details

Prime Gel 2100 Low Mod

Extremely smooth consistency, two-component epoxy gel adhesive that won’t sag, run or drip in vertical or overhead applications. USDA approved.

View Details »
View Prime Gel 2200 Flexible Details

Prime Gel 2200 Flexible

Multi-purpose. Extremely smooth consistency, two-component epoxy gel adhesive that won’t sag, run or drip in vertical or overhead applications. Very flexible; stays flexible to 40ºF (4ºC).

View Details »
View Speed Bond #1 Details

Speed Bond #1

A fast-setting, smooth consistency, two-component epoxy gel adhesive designed to anchor dowel bars, anchor bolts, rods and pins into concrete.

View Details »
Translate »