"Quick Mix" & "Single Shot" Cartridges for Prime-Flex 920, 900 LVSF, 900 XLV, and Hydro Gel SX are ideal for sealing leaking joints, cracks and pipe penetrations, and for small injection projects.

Dual component cartridges with a static mixer to pre-mix components. This pre-mixing starts the reaction and speeds up the set time. Pre-mixing also produces a better consistency foam or gel.

• Automatically proportions and mixes the components
• Easily attached to the Prime Resins Grout Needle Assembly.
• Prime Flex Hydro Gel SX, 900 LVSF and 900 XLV packaged in 22-ounce units, 10 per case (includes 10 plastic mixing nozzles); used with 1:1 manual or pneumatic gun
• Prime-Flex 920 packaged in 28-ounce units, 6 per case (includes 10 plastic mixing nozzles); used with 10:1 manual or pneumatic gun

Cartridges for Prime-Flex 900 LVSF, 900 XLV, Hydro Gel and Hydro Gel SX Polyurethane injection resins for sealing leaks in concrete structures and manholes.

• Used to inject Prime-Flex polyurethane resins directly into active water leaks
• Fits standard caulk gun or our "Single Shot" Manual Gun
• 10-fluid-ounce units
• 20 cartridges per case (includes 20 plastic injection nozzles)
• Easily attached to the Primes Resins Grout Needle Assembly

The Prime-Flex Grout Needle Assembly can be connected to either the "Single Shot" or "Quick Mix" cartridge. The assembly consists of a 12-inch stainless steel grout needle attached to an 18-inch flexible hose. It is used to

• Penetrate and inject through the rubber boot on pipe-manhole connections
• Penetrate and inject behind activated oakum seals
• Penetrate and inject through joint seals
• Inject Prime-Flex polyurethane resins into hard to reach areas

• 1:1 available for 22-ounce Prime Flex Hydro Gel SX, 900 LVSF and 900 XLV "Quick Mix" dual cartridges
• 10:1 available for 28-ounce Prime-Flex 920 "Quick Mix" dual Cartridges
• True air regulator - 100 psi maximum
• Dump valve stops material flow when trigger is released
• Nominal thrust 1,188 lbs.
• Quick disconnect fitting

• Used with 22-ounce Prime Flex Hydro Gel SX, 900 LVSF and 900 XLV "Quick Mix" dual cartridges
• 26:1 mechanical advantage
• Includes centralized kit for extra cartridge support
• In-line rods reduce chance of bending
• "Wear compensating device" approximately doubles gun life

• Used with 28-ounce Prime-Flex 920 "Quick Mix" cartridge
• 26:1 mechanical advantage
• Includes centralizing kit for extra cartridge support
• In-line rods reduce chance of bending
• "Wear compensating device" approximately doubles gun life

• Used with 300ml x 600ml Prime Seal 5800 "Quick Mix" cartridge
• 26:1 mechanical advantage
• Includes centralizing kit for extra cartridge support
• In-line rods reduce chance of bending
• "Wear compensating device" approximately doubles gun life
• Quick-change ratio gun easily converts from 2:1 (300ml x 150ml) to 1:1 (300ml x 300ml)

Click here to download printable product data sheet (PDF)