Prime Resins, Inc.
2291 Plunkett Road
Conyers, GA 30012
Phone: (770) 388-0626
or (800) 321-7212
Fax: (770) 388-0936
Pre-placed Aggreagate Method
For repairing spalls and honeycombs in concrete:
Form up the area to be repaired leaving enough room at the top of the form so that aggregate can be placed into the void. Use only clean dry aggregate that is of the suitable size for the repair. Once the aggregate has been placed form up the rest of the void. Insert a small tube in the top of the form to allow the air pressure to vent out during injection. Seal around the forms with any of the Prime Gel series materials (Prime Gel 2500 is the fastest setting). Drill a hole directly in the bottom of form or at a 45° angle in the concrete that penetrates the void from the bottom. Set ports as needed. Inject the Prime Rez 1400 until the void is full.
